Support | Order Placement | ProScada Home Page | Download Demos

ASE Driver Fact Sheet

Performance note

Application notes

Down load demo version

Driver Name: ABB Excom For Masterpiece 2xx & Advant Controller 4xx
Driver Code: ASE
Device Mfr: ABB
Last Update: 05/25/05 02:35:54 PM

 

Version:
Platform Version Type Media Available Inventory ID
Windows 5.31 COMM Disk 8/19/96   
WinNT 6.02 COMM Disk 8/19/96   

 

Device Supported:
Mfr Device Comments
ABB MP 2xx with DSCA114 Excom Protocol card with 4 channels
  AC 4xx with CI531 2 channel sub module directly on CPU

 

Interface Supported:
Interface Comments
Standard Serial Ports  Does allow routing through DCS ethernet network to remote DCS's

 

Command Supported:
Device Command Description Uses
All Devices  Read  AI, AO, DI , DO, DAT(32 bit)  Normal IO-
All Devices  Write  DATS only All controls & setpoints must go via DATS

 

Data Type:
Data Type Comments
Float   
Signed   
Unsigned   

 

Protocol Supported:
Type Protocol Comments
Multi Drop  EXCOM  Does allow routing thru DCS's ethernet network to other DCS'es

 

Comments: 
COMMANDS NOT SUPPORTED:  DataSets - not suitable for SCADA 

 

Pricing (Per SCADA node)

ASE Driver diskette with online documentation   USD $ 800
Shipping   USD $ 80

 

©Copyright 2004 ProScada CC. All Rights Reserved