ProScada Communication Systems, vendos of IO Drivers for the Scada environment

 

Support | Order Placement | ProScada Home Page | Download Demos

KM4 Driver Fact Sheet

Note on why you should use this driver & not Suconet-K. with example

See Tips on Optimising Most Drivers

Down load demo version


Driver Name: Klöckner MOELLER Sucoma A for PS4xx & PS3xx
Driver Code: KM4
Device Mfr: Klöckner Moeller
Last Update: 05/25/05 02:35:44 PM

 

Version:
Platform Version Type Media Available Comment
NT / 95 6.02 COMM Disk 01/08/96  Now works for PS 416
NT / 95 6.03 COMM Disk 16/10/98  Now works for PS 3xx

 

Device Supported:
Mfr Device Comments
Klöckner Moeller PS4-2xx & PS4-141 Standard programming cable to PRG port
Klöckner Moeller PS416 Standard programming cable / RS485 PRG/SBI/COM
Klöckner Moeller PS316 & 306 RS485

 

Interface Supported:
Interface Comments
Standard Serial Ports  Standard Serial Ports , Programming ports on PLC or SBI/COM in PS416.

 

Command Supported:
Hardware Commands Purpose
all MW (Marker Words) Read/Write

 

Data Type:
Data Type Comments
Signed  To Use DWORD types you use signal conditioning in the Database
Unsigned   

 

Protocol Supported:
Type Protocol  
Point to point  Sucoma A
Baud Rates: 9600 , 19200

 

Comments: This driver does not Support Suconet K but this may not be a bad thing in most situations, where 1 PLC acts as a "Mail Box" & is also the Suconet Master. Here all PLC-PLC Interlocking goes via the Master PLC & not via the SCADA which is a more reliable setup.

PS4 200

The only setup required for this driver is to load a working program into the PLC, the driver does not work if the PLC memory is empty.

PS416

The PS 416 has two ports that may be used -

The PRG port requires no setup, runs only at 9600,n,8,1. With either RS232 OR RS485

The SBI/COM port which must be setup for transparent mode, recomended baud settings are 9600,n,8,2 OR 19200,n,8,2. In addition the Sucoma_A function block must be called every program cycle. The speed of the driver is determined by the rate at which Sucoma_A is called so call it more than once in large programs.

Pricing (Per SCADA node)

KM4 Driver diskette with online documentation   USD $ 800
Shipping   USD $ 80

 

©Copyright 2004 ProScada CC. All Rights Reserved