Support | Order Placement | ProScada Home Page | Download Demos

A31 Driver Fact Sheet

See Tips on Optimising Most Drivers

Down load demo version


Driver Name: ABB Procontic CS31 PLC
Driver Code: A31
Device Mfr: ABB
Last Update: 05/25/05 02:36:29 PM

 

Version:
Platform Version Type Media Available Comment
Win 95 6.02 COMM Disk 8/19/96   
WinNT 6.02 COMM Disk 8/19/96   

 

Device Supported:
Mfr Device Comments
ABB 07 KT31,
07 KT 91,
07 KT 92,
07 KT 93
The A31 I/O driver uses the built in comm ports on the CS31 units. There are no specific setups that need to be performed on the PLC, although you may want to modify the comm port settings using an SINIT function block to set a higher baud rate than the default setting and to enable parity error checking

 

Interface Supported:
Interface Comments
Standard Serial Ports  You can use upto 8 serial ports with for example a Digiboard. When using the ABB supplied cable, the flow conrol in the driver config should be set to RTS/CTS

 

Command Supported:
Hardware Commands Purpose
all EW Read Analog inputs
all E Read Digital inputss
all AW Read/Write Analog Outputs
all A Read/Write Digital Outputs
all MW Read/WriteWord registers
all M Read/Write Digital Flags
all KW Read/Write constant words
all MD Read/Write Long Word registers
all K Read/Write constant flags
all KD Read/Write constant Long Words
all S Read/Write step flags

 

Data Type:
Data Type Comments
Float   
Signed   
Unsigned   

 

Protocol Supported:
Type Protocol  
Point to point  CS31 Native
Baud Rates: 9600, 19200

 

Comments:
COMMANDS NOT SUPPORTED:  

 

Pricing (Per SCADA node)

A31 Driver diskette with online documentation   USD $ 800
Shipping   USD $ 80

 

Copyright 2004 ProScada CC. All Rights Reserved