Features

Supports Master AND Slave modes. In Slave mode it is suitable to use to Make data from the SCADA available to the Central Network Master or using an OPC-OPC Bridge to send data from any OPC Server to the Network Master.
Fully event driven protocol & driver - high performance even on narrow bandwidth serial links
In iFix (Not Fix32) the time displayed in the Alarm Summary is the true remote time stamp when used with OPC the OPC timestamp is the remote time stamp.
Remote time stamping or Serial event Recording (SER) - This driver logs all time stamped information to CSV text files. The driver also incorporates ODBC ie. it logs the time stamped data directly to any data base eg. MS SQL Server or Oracle.
Time synchronises RTU's to PC time
16 Serial ports supported
Stand alone OPC server, OPC clients see remote time stamps

Version:

Platform	Version	Type	Media	Available	Inventory ID
Win2k/XP/ 2003 Serv	7.9.23	COMM	WEB	22/03/2006

Device Supported:

Interface Supported:

*Interface*	*Comments*
Standard Serial Ports	Use any Multidrop capable bus eg. RS485, RS422, Fiber, radio modems

Protocol Options for IEC 870-5-101

*Protocol Attribute*	Value
Physical Layer	Balanced or Unbalanced V24 (RS 232 PC Ports) upto 115200 kbd
Link Layer Adress	1 Octet
Max Link Frame length	255 bytes
Application layer Common address of ASDU	One Or Two Octets
Information object address	One Or Two or 3 Octets
Cause of transmission	1 Octet

870-5-103

Protocol Supported:

*Type*	*Protocol*	Comments
Multi Drop	IEC 870-5-101 Master	The most common IEC protocol for telemetry applications
Multi Drop	IEC 870-5-103 Master	The 103 profile is a more applications specific protocol for electrical protection equipment. Howver I believe that it is Inferior to the 101 profile even for these applications
Multi Drop	IEC 870-5-101 Slave	Passive RTU emulation

Comments:

COMMANDS NOT SUPPORTED:

Pricing(Per SCADA Node)

RP5 Drivers diskette with online documentation		USD	$ 1200
Shipping		USD	$ 80